|
|
 |
| IPN8710
Drinking pipe internal |
 |
Summarize:
For various corrosion medium such as acid, caustic, salt, oxidizer,
steam and so on which exit in the water supply pipe, the coating must
have the quality of chemical inertness and acid-/caustic-/salt-resistant,
the structure of coating film should be caulk, the resistance to water
permeability must be good. The coating also should have the strong
adhesion, it should be tenacious and full.
IPN8710 primer: This kind of primer is made of such as the polyurethane
polyethylene, modified epoxy resin, non-toxic anticorrosive pigment-packing,
accessory ingredient and so on. Through the procedure of cold setting,
the coating form into interpenetrating networks, the structure of
coating film should be caulk, the coating must be acid-/caustic-/salt
– corrosion resistant, its performance should be very excellent, the
adhesion of the coating also should be very strong.
IPN8710 finish caot: This kind of finish coat is made of such as
epoxy, modified rubber resin, non-toxic anticorrosive pigmert-packing,
accessory ingredient and so on. The performance on chemical resistant
of this kind of the finish coat the is excellent, the finish coat
should be non-toxic and have the ability of how to resist the microbiological
corrosion.
PurPose: IPN8710 primer is used for the precoating of the inner
wall of the water supply. IPN8710 finish coat is used for the finish
coat of the inner wall of the water supply.
|
|
